Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Hemet
Dryer vent cleaning in Hemet typically runs $165 – $295 for a standard single-story home, and most jobs are finished in 90 minutes to two hours. If your dryer has been taking two cycles to dry a load, the fix is usually a clogged vent, not a failing appliance. Our Hemet crews work from the San Jacinto Valley to the foothills of Simpson Park, and we know exactly what decades of Hemet dust does to a vent run. Call (350) 240-5513 and a live person answers, day or night.
Hemet homes present a very specific set of dryer vent problems. The housing stock here, much of it built between the 1960s and 1980s, often still has the original 4-inch flex duct that was installed when the house went up. That duct is now 40 to 60 years old, brittle from decades of dry heat, and frequently crushed, disconnected, or packed with a fine silt that this valley produces. We’ll get into exactly what we find and what it costs to fix, but the short version is this: if your dryer vent has never been opened and inspected, the odds that it’s working properly are low.
Why Mortons Air Duct Riverside Is Hemet’s Preferred Dryer Vent Cleaning Company
We’ve spent enough time in Hemet attics and crawlspaces to know what this valley’s dry, windy climate does to vent piping. The crews that come to your door are background-checked, uniformed, and trained on the specific failure modes we see in 1960s and 1970s Hemet homes. Nobody here is learning on your house.
What families most often tell us is that they were burned before by a crew that rushed the job, left a mess, or hit them with a higher invoice after the work was done. We do the opposite on all three counts. You get a written price before any work starts. You get shoe covers and drop cloths on every visit, and a photo of the clean-up before the crew leaves. Paul Adeyemi, who leads our team, built the whole operation around that promise. It’s called the Cedarwell Care Promise, and it’s not a slogan – it’s a checklist our people actually work to, on every single job.
And when you call, a human picks up. Not a chatbot, not a voicemail tree. Call (350) 240-5513 and you’ll talk to someone who can book your Hemet appointment while you’re on the line.
Styles & brands we work with
Dryer Vent Installation in Hemet
Dryer Vent Installation in Hemet is a job we do regularly because so many of the original vent runs in this valley were installed with the wrong material or a weak layout. When a vent run is too long, uses too many elbows, or terminates under a roof eave where Santa Ana winds push debris back in, the right fix is often to replace it, not just clean it. A new run using smooth rigid metal pipe typically costs $185 – $360 in Hemet depending on access, run length, and whether we’re going through an attic, a crawlspace, or an exterior wall.
Rigid Pipe Replacement
We replace old flex duct with rigid metal pipe whenever the layout allows. Rigid pipe has a smooth interior wall that doesn’t trap lint the way corrugated flex does, and it holds up better to Hemet’s dry heat.
New Vent Terminations
Many older Hemet homes terminate under the eave, which is an open invitation for dust and nesting material to work back through the damper. We install a proper wall or roof cap with a bird guard and a closing damper, so the vent seals when the dryer isn’t running.
Dryer Vent Repair in Hemet
Dryer Vent Repair in Hemet usually means one of three things: a crushed pipe section, a disconnected joint, or a clogged termination. In each case, you’ll notice the dryer running hotter, taking longer, or the laundry room feeling humid. Repair costs in Hemet generally run $120 – $240 for a straightforward fix, and more if we need to open a wall or re-route a bad run.
Crushed and Disconnected Runs
In older Hemet homes, we often find flex duct that has been pinched between joists or pulled apart at a joint. Lint leaks out of the gap, moisture builds up, and the dryer works harder than it should. We re-connect the run and replace the damaged section with rigid pipe where possible.
Attic and Slab-Foundation Runs
Vent runs through a hot Hemet attic dry out plastic flex over time until it cracks. Runs under a slab foundation, which is common in this valley, can develop low sags where fine silt settles and compacts into a dense block. Both problems require the same answer: find the restriction, cut it out, and replace it with a properly supported run.
Trusted Brands We Service in Hemet
We don’t work with entry-level rental gear. Our Hemet crews use Rotobrush and Nikro equipment for vent cleaning, and when a repair calls for a new damper or cap, we stock Guardsman parts on the trucks. That means fewer return trips and a faster job for you. Whether your dryer is a gas or electric model, a standard 4-inch vent or a larger commercial run, the equipment matches the job. We also work on Honeywell vent accessories when a home has a booster fan or a humidity-sensing controller in the line.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Hemet Homes
- The “Hemet dust” compaction. In this valley, we’re talking about a very fine, powdery soil that works its way through closed windows and into the dryer vent. Over a year, that dust coats the inside of the pipe, hardens under heat, and can cut airflow by more than half without you ever seeing a warning sign.
- Eave terminations back-clogging. Many older Hemet houses vent the dryer under the roof eave. The Santa Anas blow dust, leaves, and even nesting material straight into the open damper, so the vent plugs from the outside in. You empty the lint trap, and the dryer still won’t dry.
- Brittle attic runs. Attic temps in a Hemet summer routinely exceed 120°F. Plastic flex duct from the 1970s and 1980s dries out, splits at the seams, and leaks moist lint into the attic where it belongs nowhere near your insulation.
- Slab-floor sags. Homes on slab foundations, which Hemet has a lot of, often route the dryer vent under the floor. A low sag acts like a catch basin for fine dust, and within a season it can pack into a compressed block that overheats the dryer and kills airflow.
Pricing for Dryer Vent Cleaning in Hemet, CA
A standard dryer vent cleaning for a single-story Hemet home with an accessible vent run runs $165 – $295. If the run goes through an attic or under a slab, or if the vent is heavily packed and requires camera inspection before and after, expect to be at the higher end or slightly above. If we find a crushed or disconnected section, a repair typically adds $120 – $240, and a complete re-run with rigid pipe lands between $185 and $360 depending on the layout. That’s an honest range, and your written quote comes before any work starts, so there are no surprises on the invoice. Call (350) 240-5513 for a free estimate.
We were called to a 1972 single-story on Cornell Street after the dryer started taking two cycles to finish. Our camera inspection found a 14-foot run of original 4-inch flex duct that had pinched at a 90-degree elbow and was caked with Hemet dust. We removed the crushed section, installed smooth rigid pipe to reduce resistance, and sealed the joints with aluminum tape. Airflow more than doubled, and the dryer now finishes in under 40 minutes.
We Also Serve Cities Near Hemet
Our Dryer Vent Cleaning team covers Hemet and the surrounding valley communities. If you’re in Menifee, Beaumont, Moreno Valley, or Perris, we’ll schedule you the same way we schedule our Hemet appointments, with the same written-price-before-work rule and the same Cedarwell Care Promise on the job.
Serving Hemet, CA - Our Local Coverage Area
We’re based in the Hemet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Hemet
Every 12 months, at minimum. The fine Hemet dust that settles in this valley compacts inside vent runs surprisingly fast, and in homes built before 1990 with the original flex duct, we routinely find airflow cut by half within a year even when the homeowner empties the lint trap after every load. Annual cleaning is the number that matches what we actually see in Hemet homes, not a national average someone printed in a brochure. Call (350) 240-5513 to schedule yours.
Smooth rigid metal pipe, without exception. It resists the cracking that brittle plastic flex develops in a Hemet attic, and it doesn’t trap lint the way corrugated flex does. We use rigid pipe on every replacement run, and we seal the joints with aluminum tape, not screws, which keeps the inside of the run smooth.
Look for three signs together: the dryer takes two cycles to dry a load, the laundry room feels humid while the machine runs, and you might smell a warm, musty odor near the dryer. Any one of those on its own might be other things, but all three in a 1960s or 1970s Hemet house usually means a run has been pinched or pulled apart somewhere between the dryer and the outside cap. Call (350) 240-5513 and we’ll camera-inspect the line and show you exactly what we find.
Yes, and in a very specific way. If your vent terminates under the roof eave, the Santa Anas blow dust, leaves, and debris directly into the open damper all through the fall. The vent plugs from the outside in, so the problem keeps returning even after a thorough clean. The permanent fix is to re-terminate the run with a proper wall cap and bird guard.
Because the restriction is not in the trap; it’s further down the run. In slab-foundation Hemet houses, a low sag can trap a dense block of silt that the trap never sees. In attic runs, a cracked flex pipe can leak enough air to wreck the draft. The dryer then cycles its thermostat to protect itself, which is why the outside of the machine feels hot while the clothes stay damp. Call (350) 240-5513 and we’ll find the actual blockage.
Written by Paul Adeyemi, Owner at Mortons Air Duct Riverside, serving Hemet and the San Jacinto Valley. Contact us at (350) 240-5513 for a free estimate on dryer vent cleaning in Hemet.